| Specification: | Gada Bina Usaha is one-stop direct source for all your Elastomeric
Bearing Bridge Pad requirements.
Elastomeric Bearing Pads are used extensively in today' s construction industry. Although Elastomeric Bearing Pads have been widely used in Bridges, Elastomer Bearing Pad now being specified in a wide variety of applications where flexible structural support and/ or vibration isolation is required.
Typical applications include:
Railway, Concrete buildings, Parking garages, Walkways, Storage tank, Pipe supports
Gada Bina Usaha can produce elastomeric bridge bearings pads in accordance with all of the
following international standards: Indonesia SNI 03-3967-2008
BRIDGE / BEARINGS
Elastomeric Bearings Pads are designed to transmit the
load of the superstructure to the
substructure, while allowing specific
movements and rotation of the
superstructure caused by wind or seismic
effects, temperature variations, deck
deflections, sinking of any of the
supports, elastic shortening due to creep,
shrinkage or prestressing, etc.
2 Type of Elastomeric Bearing Pads We Produce :
PLAIN
ELASTOMERIC BEARING PADS / NON-REINFORCED ELASTOMERIC BEARINGS
These products are simple, robust and corrosion free as the steel inserts are
covered entirely by rubber. Easy to install, they will provide long problem
free service.
Gada Bina Usaha Non-Reinforced bearings can be used in
many construction and civil engineering
applications to support concrete and steel
structures, and where a simple, low-cost
rubber separation strip is capable of carrying
compressive loads, while at the same time
providing translational movement and
rotational capacity. Plain Elastomeric Bearings Pad have
a large and varied range of possible
applications though these bearings are more
typically used in prefabricated structures.
LAMINATED ELASTOMERIC BEARINGS/ REINFORCED ELASTOMERIC BEARINGS
Gada Bina Usaha Reinforced bearings are designed
for use in bridge and building structures
as a vertical-load-bearing component
capable of providing translational
movement in any direction and
simultaneous rotational capacity. Gada Bina Usaha
Elastomeric Bridge Bearings with simple
reinforcement are made up of multiple
elastomer layers separated by reinforcing
steel plates moulded on the actual layers,
and can be manufactured in a rectangular
or circular shape to meet individual
engineering requirements.
Contact us for the type, size and specification required:
Julius Andreas
Tel / Fax: 0341-795882
Hp: 081 838 6648 - 081233069330
E - Mail: gadabinausaha@ gmail.com |
Itrademarket SMS
